คำตอบที่ได้รับเลือกจากเจ้าของกระทู้
ความคิดเห็นที่ 1
ลองกดปุ่ม Esc ทันทีที่เปิดเครื่อง หรือยัง หรือไม่ก็ กดปุ่ม Delete/ESC/ F2 อะไรก็ตาม เพื่อเข้า Bios
https://computertechnicians.com.au/how-to-reset-intel-nuc/
How to Reset an Intel NUC?
All data will be lost so please backup important files before proceeding!
1. Hold down the power button for 20 seconds, then loosen your grip and release the power button. After doing so, re-press and keep holding down the power button until your NUC turns off completely. You can now let go of the power button again. The process takes roughly 30 seconds in total from start to finish, not including booting time after turning on once more.
2. When your NUC boots back up press F2 immediately or wait 2 seconds and it should load the bios menu. Once your in the bios section use the arrow keys to navigate and click enter when you find advanced.
3. Once in advanced mode use the arrow keys to navigate up or down until you find “reset config” select this option by pressing enter on it with your arrow keys and press enter again when prompted for confirmation of your choice.
4. Wait approximately 3-5 seconds for a message to display saying something along the lines of ‘operation complete’. When done, exit out of bios using F10 and allow your system to reboot.
https://computertechnicians.com.au/how-to-reset-intel-nuc/
How to Reset an Intel NUC?
All data will be lost so please backup important files before proceeding!
1. Hold down the power button for 20 seconds, then loosen your grip and release the power button. After doing so, re-press and keep holding down the power button until your NUC turns off completely. You can now let go of the power button again. The process takes roughly 30 seconds in total from start to finish, not including booting time after turning on once more.
2. When your NUC boots back up press F2 immediately or wait 2 seconds and it should load the bios menu. Once your in the bios section use the arrow keys to navigate and click enter when you find advanced.
3. Once in advanced mode use the arrow keys to navigate up or down until you find “reset config” select this option by pressing enter on it with your arrow keys and press enter again when prompted for confirmation of your choice.
4. Wait approximately 3-5 seconds for a message to display saying something along the lines of ‘operation complete’. When done, exit out of bios using F10 and allow your system to reboot.
แสดงความคิดเห็น
Intel Nuc
( ทั้ง Keysboard + Mouse ไม่ทำงาน กดเข้า Bios ก็ไม่ได้ ) หรือถ้าต้องส่งซ่อม แนะนำหน่อยว่าต้องส่งซ่อมที่ใหนครับ