#define BLYNK_PRINT Serial
/* Fill in information from Blynk Device Info here */
#define BLYNK_TEMPLATE_ID "TMPL6bpD9LR-k"
#define BLYNK_TEMPLATE_NAME "LED contol"
#define BLYNK_AUTH_TOKEN "fb6Ar4VaZQ8nVac3Xb2Ohn892Sg6xNxl"
#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>
// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Tinna";
char pass[] = "tinna099";
BlynkTimer timer;
BLYNK_WRITE(V0)
{
  int value = param.asInt();
  Blynk.virtualWrite(V1, value);
}
BLYNK_CONNECTED()
{
   Blynk.setProperty(V3, "offImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations.png");
   Blynk.setProperty(V3, "onImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations_pressed.png");
   Blynk.setProperty(V3, "url", "https://docs.blynk.io/en/getting-started/what-do-i-need-to-blynk/how-quickstart-device-was-made");
}
void myTimerEvent()
{
  Blynk.virtualWrite(V2, millis() / 1000);
}
void setup()
{
  // Debug console
  Serial.begin(9600);
  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
}
  
void loop()
{
  Blynk.run();
  timer.run();
}